Standard System KL

  Standard System AKL


Standard System KL
Concealed Installation

Clip-in System

The upturned edges of the tiles are provided with pips that snap into the clip-in profile when the tile is inserted.
Removal of the tiles is best accomplished with a special hook which is inserted in the gap of two tiles.
The suspension system consists of the clip-in profiles which are either suspended directly from the solid ceiling or -if necessary- additionally supported by means of cross profiles.


Size of tiles

300 x 300 mm (standard)
300 x 600 mm (standard)
500 x 500 mm (standard)
600 x 600 mm (standard)
625 x 625 mm (standard)
other sizes are also available


Standard System KL

Surface of tiles

polyester-powder coating
approx. RAL 9010;
gloss level: 20 %, acc. to Gardner 60°
thickness: min. 80 my
surface structure: smooth, free floating
RAL colours are also available

Material

galvanized steel
0,5 and 0,63 mm thick
zinc coating
on both sides

phosphated and chromated

stainless steel,
0,6 mm thick
aluminium,
0,7 mm thick
aluminium anodized,
0,7 mm thick


Execution

unperforated and perforated
L 2516 / L 2520 / L 1622
other perforations
are available


Standard System AKL
Concealed Installation

Clip-in System

The upturned edges of the tiles are provided with pips that snap into the clip-in profile when the tile is inserted.
Tongues on both ends of one side of the tile keep it fixed in the profile and when opening, the tile swings down.

This construction guarantees an easy access to the void ceiling.
The suspension system consists of the clip-in profiles which are suspended directly from the solid ceiling and are additionally supported by cross profiles.


Size of tiles

300 x 300 mm (standard)
300 x 600 mm (standard)
500 x 500 mm (standard)
600 x 600 mm (standard)
625 x 625 mm (standard)
other sizes are also available

Standard System AKL


Surface of tiles

polyester-powder coating
approx. RAL 9010
gloss level: 20 % acc. to Gardner 60°
thickness: min. 80 my
surface structure: smooth, free floating
RAL colours are also available

Material

galvanized steel
0,63 mm thick
zinc coating
on both sides
phosphated and chromated

stainless steel,
0,6 mm thick
aluminium,
0,7 mm thick
aluminium anodized,
0,7 mm thick


Execution

unperforated and perforated
L 2516 / L 2520 / L1622
other perforations
are available