Standard System I
Concealed Installation

Lay-on System I

The rectangular or square tiles have specially profiled flanges on two sides and are layed on the Z-shaped carrier profiles without the use of tools or any other accessories. Single tiles may subsequently be removed just as easily. The suspension system consists of carrier profiles which are bolted to the traverse perforated angles to form a rigid structure. The spacing of the carrier profiles is equal to the tile length whilst the perforated angles are spaced approximately 1000 to 1500 mm apart, depending on the individual requirement.
The suspension of the perforated angle from the solid ceiling is done by means of Nonius hangers providing a precise adjustment facility.


Execution

unperforated and perforated
L 2516 / L 2520 / L1622
other perforations
are available

Standard System I

Surface of tiles

polyester-powder coating
approx. RAL 9010
gloss level: 20 % acc. to Gardner 60°
thickness: min. 80 my
surface structure: smooth, free floating
RAL colours are also available
joint filler: black

Material

galvanized steel
0,63 mm thick
zinc coating
on both sides
phosphated and chromated

stainless steel
0,6 mm thick,
aluminium
0,7 mm thick,
aluminium anodized
0,7 mm thick


Size of tiles

rectangular tiles:
width: up to 1400 mm
length: up to 3000 mm

square tiles:
600 x 600 mm
625 x 625 mm
special sizes on request available